What Is The Function Of A Test Tube Rack – Laboratory glassware is the most commonly used laboratory equipment in various laboratories. Among many glassware, the test tube is applicable in biological and chemical laboratories.

A test tube is a long cylindrical finger-shaped tube used in various experiments. There are different types depending on the material and the purpose of the experiment.

What Is The Function Of A Test Tube Rack

What Is The Function Of A Test Tube Rack

Depending on the laboratory, the tubes also have different functions; in a chemical laboratory, a test tube helps in testing the properties of various chemicals and gases. Likewise, the microbiology laboratory uses it to prepare culture media, collect samples, and retain fluids.

Development Of Microorganisms As A Function Of Oxygen Concentration….

The test tubes are closed at the bottom and open at the top. The bottom of most test tubes is slightly curved/spherical. The length and diameter of the tubes vary considerably from small (Durham) to large culture tubes.

Test tubes are available in different sizes; ranging from 10 to 20 mm wide and 50 to 200 mm long. The standard test tube size used in laboratories is 18 mm✕150 mm.

These laboratory glassware are classified into different types on two bases; on the basis of the material used to make them and on the basis of the purpose. Based on the material

Other materials used in the construction of test tubes are metal and ceramics. However, the use of test tubes made of these materials is relatively rare. Based on purpose

Test Tube Blood Sample Ast Sgot Stock Photo 1912381768

Depending on the purpose, test tubes are of different types. Like thin wall, medium wall, thick wall, rimmed, screw top, ground glass top, plain top, graduated test tubes, and some come with stoppers, push caps, and some are test tube types.

Tubes have a wide range of functions depending on the laboratory. In chemical laboratories, these tubes examine the properties of substances and perform experiments in various forms between two or more chemicals. The different functions of test tubes are as follows:

Test tubes, although small, are an essential piece of laboratory glassware. This is most important in laboratories dealing with risky, hazardous chemical materials, infectious samples and growing microbial cultures. A brief description of some of the importance of test tubes is as follows:

What Is The Function Of A Test Tube Rack

Hello, I am Ashma Shrestha. I recently completed my Masters in Medical Microbiology. Passionate about writing and blogging. Key interest in virology and molecular biology.

Quiz & Worksheet

Biological and chemical laboratories handle different chemicals, reagents and samples for different experiments. The use of equipment made of plastic is not practical in many cases because plastic…

The microbiology laboratory deals with the discovery, cultivation and identification of microorganisms such as bacteria, fungi, viruses, etc. Some of the requirements of microbiology laboratories are necessary…

Is an online guide to microbiology, specifically medical microbiology. This blog shares information and resources about pathogenic bacteria, viruses, fungi and parasites. We strive to make this site user-friendly and resourceful with timely/up-to-date information on each pathogen, disease caused by them, pathogenesis and laboratory diagnosis. Test tube A test tube, also known as a culture tube or sample tube, is a common piece of laboratory equipment consisting of finger-length glass tubes.

Presentation on theme: “A test tube, also known as a culture tube or sample tube, is a common piece of laboratory equipment consisting of a finger-length glass tube.”— Presentation transcript:

Blood Collection Tubes: Definations, Types, Uses And More

1 test tube A test tube, also known as a culture tube or sample tube, is a common piece of laboratory equipment consisting of a finger-length glass tube. Test tubes are widely used by chemists to open, mix, or heat small amounts of solid or liquid chemicals.

2 Test tube rack A test tube rack is a wooden, metal or plastic storage rack used to hold test tubes in an upright position.

3 Test Tube Brushes A test tube brush is a device made of nylon fibers attached to a twisted wire shaft, which is used to clean the inside of test tubes.

What Is The Function Of A Test Tube Rack

4 Test Tube Holder A test tube holder is a set of metal grips made specifically for holding test tubes, especially when they are hot.

Preparation For Laboratory Tests (blood A..

5 Scale (or balance) A balance is a device used to determine the mass of a sample or solid object.

6 spatulas A spatula is a metal or plastic spatula, sometimes with a flattened end, used to move solid material.

7 weighing pan A plastic or glass container, often disposable, used to weigh solids on a balance.

8 apron A fabric covering used to prevent chemicals from penetrating clothing or skin. Heavy duty aprons used in laboratories are made of rubber.

Test Tube Rack

9 Erlenmeyer flask A type of laboratory flask that has a conical body and a cylindrical neck. The conical shape allows the contents to be swirled or stirred during the experiment, and the narrow neck prevents the contents from spilling. A small neck reduces evaporation losses compared to a glass.

10 Burettes A burette (also burette) is a vertical cylindrical piece of glassware with volumetric markings on the side and a stopcock for dispensing known amounts of liquid.

12 Volumetric flask A laboratory flask that is calibrated to contain a precise volume at a specified temperature. It is usually used to create solutions.

What Is The Function Of A Test Tube Rack

15 funnel A pipe with a wide, conical mouth and a narrow handle. It is used to channel liquid into a container with a small neck.

Lab Tools And Functions

21 auxiliary clamp A spring-loaded clamp that can be used to hold laboratory glassware, especially flasks or test tubes. The clips can be adjusted on the ring stand to sit at different heights. It is usually used to place a piece of glassware over the flame.

22 tongs Large tongs for gripping and lifting vessels made of heat-resistant materials used in chemical reactions at high temperatures.

23 ring stand A metal stand consisting of a long, upright rod attached to a base. Rings and clamps can be attached.

24 wire gauze A wire mesh placed over a ring on a ring stand and used to support the beaker when heated.

Four Common Pathology Tests And What They Reveal About Your Health

25 Thermometer A device consisting of a glass tube containing alcohol, which is used to measure changes in temperature.

26 graduated cylinder A hollow glass tube with markings on the sides, used to measure the volume of liquids.

27 Litmus paper A type of thick paper treated with an indicator that, in contact with a solution, will identify the solution as an acid or a base by changing its color.

What Is The Function Of A Test Tube Rack

28 bottle with a dropper A bottle with a lid that contains a small tube with a suction bulb, and is used for dispensing liquid in small quantities.

Test Tube Chemical Analysis Laboratory Stock Illustration

30 eye wash A device that directs water upwards towards the face, used to wash the eyes when chemicals accidentally enter.

Download ppt “Test tube A test tube, also known as a culture tube or sample tube, is a common piece of laboratory equipment consisting of a finger-length glass tube.”

In order for this website to function, we log user data and share it with processors. To use this website, you must accept our Privacy Policy, including our cookie policy. Great care must be taken in all aspects of specimen collection, handling and storage to ensure the most accurate clinical pathology results. This section provides general guidelines and recommendations for optimal collection and submission of blood specimens for clinical pathology testing. More detailed information on specific recommendations for individual tests can be found in related sections (hematology, hemostasis, urinalysis, chemistry, cytology) and below each test result. This information includes the effects of controlled preanalytical variables such as how you collect, handle, and store the sample prior to submission to the laboratory. Note that this page refers to blood samples, but some chemical tests can also be performed on eye fluids.

There are many different types of tubes used for clinical pathology testing, the most common of which are shown in the image below, and are: green tip tubes containing lithium heparin (good for statistical samples in large animals), red tip without anticoagulant, purple peaks with potassium EDTA as anticoagulant and blue peaks with citrate as anticoagulant. Their use for clinical pathology testing is shown in the figure below, including the sample taken from whole blood and used for testing. All samples for chemistry and coagulation testing should be centrifuged as soon as possible to obtain serum or plasma, and not left as whole blood, when the samples are sent to laboratories for testing. EDTA tubes for hematology tests should not be centrifuged at all and should be stored as whole blood. Some of the chemistry tubes contain silicone gel, which makes it easier to separate the serum or plasma from the cells. These are more commonly used in large and small animal practice because it can take some time for large animal samples (especially horses) to clot and release the serum from the clot. Although serum is generally the preferred and traditional sample for chemical testing, in large animals we often use heparinized plasma (from a green-tip tube), for easier and faster extraction of plasma from cells, as well as higher plasma yield, especially for stat. samples. Clinicians also collect blood into 2 heparin microcontainers (0.5 ml volume) from each animal for exotics (eg birds, small rodents, reptiles) and small animals with expected low blood yield (eg puppies, kittens, small dogs or cats) . One microtainer rarely gives us enough volume to perform all the tests

Test Tube A Test Tube, Also Known As A Culture Tube Or Sample Tube, Is A Common Piece Of Laboratory Equipment Consisting Of A Finger Length Of Glass Tubing.

What is test tube rack, what is the function of test tube, test tube rack, test tube rack function in laboratory, function of test tube rack, what is the function of test tube brush, what is the function of fallopian tube, plastic test tube rack, what is the function of a test tube rack, what is the function of eustachian tube, function of the test tube, autoclavable test tube rack

Iklan